Slag in Sleeve

Forum Replies Created

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 3, 2018 at 7:49 pm #1643
    Slag in Sleeve
    Spectator

    Thanks again Cassgazz, thats a good option. I had been thinking that a 6G pipe would be the way to go. The additional tests will be good too as I have some pressure pipe comming up.

    Cheers SiS

    February 3, 2018 at 9:46 am #1639
    Slag in Sleeve
    Spectator
    February 2, 2018 at 11:31 pm #1447
    Slag in Sleeve
    Spectator
    January 30, 2018 at 4:39 am #1448
    Slag in Sleeve
    Spectator
    January 27, 2018 at 10:36 pm #1446
    Slag in Sleeve
    Spectator

    The awnser should be yes.

    January 22, 2018 at 2:34 am #1457
    Slag in Sleeve
    Spectator

    As I read AS/NZS 1554.1, if your 25mm plate is acting as a backing bar I’d say t1 + t2 + t3 = 155mm. If its being added after welding your two 65mm plates together I’d say t1 + t2 = 90mm.

    What Control said 😉

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)